Display Assembly; Removing The Display Assembly - Dell Latitude 9420 Service Manual

Next steps
1. Install the base cover.
2. Install the SIM card tray.
3. Install the SD card.
4. Exit service mode.
5. Follow the procedure in

Display assembly

Removing the display assembly

Prerequisites
1. Follow the procedure in
2. Remove the SD card.
3. Remove the SIM card
4. Enter service mode.
5. Remove the base cover.
About this task
The following images indicate the location of the display assembly and provide a visual representation of the removal procedure.
NOTE: The display assembly removal procedure is the same for both laptop and 2-in-1 chassis.
After working on your computer.
before working inside your
tray.
computer.
Removing and installing components 29