Attaching The Front Bezel - Extreme Networks ExtremeWireless C5215 Installation Manual

Figure 3: C5215 Front Control Panel
Marking
A
B
C
D
E
F
G
H

Attaching the Front Bezel

The appliance comes with an optional front panel bezel, which can be attached to the front of the
chassis by snapping it on the rack handles. A key lock allows you to lock the bezel in place to restrict
access to the controls. You can monitor the system status indicators with the bezel in place.
Before installing the bezel, you must install the rack handles as shown in
1 Lock the right end of the front bezel to the rack handle (see letter "A" below).
ExtremeWireless™ Appliance C5215 Installation Guide
Description
System ID Button w/ Integrated LED
NMI Button
Mgmt Port Activity LED
Not Used
System Cold Reset Button
Drive Activity LED
System Status LED
Power Button w/ Integrated LED
Installation Process
Installing the Rack Handles.
11