Open Window Function - Supra QUICKFIX 500 Manual

as below:
Comfort mode: Press + and
-
the temperature from 5-35°C.
ECO mode: Press + and
-
temperature from 1-31°C.
- Note: ECO mode=Comfort mode - 4°C
- Anti-frost mode: the screen display
target temperature is 7°C. The temperature
can't be adjusted.
- P1/P2/P3: Pre-set heating program.
- Note: If the clock and day setting are not finis-
hed, the first time to enter P1/P2/P3 program
setting, it is requested to set day and clock
setting in advance.
P1: (Monday-Sunday) unadjustable program
P2:(Monday-Friday) unadjustable program
P2:(Saturday-Sunday) unadjustable program
P3:(Monday-Friday) Adjustable program
P3:(Saturday-Sunday)
P3 adjustable program setting
- 1. When under P3 mode, press
to enter day setting.
- 2. The screen displays
set from (Monday-Sunday). Press
-
to set
-
to set the
. The
Adjustable program
M
over 3 secs
-
, press + and
to
to
M
confirm and enter hour setting
- 3. The screen displays
to set from 00-24). Press
mode for every hour (Comfort mode
mode or anti-frost mode for no indicators
on)
- 4. Repeat the operation until you have comple-
ted the schedule of every hour and every day.
- Note: After setting heating mode for hour 23,
press + to come back to day setting.
- Note: when screen displays
finish all setting with display of
TIMER OFF FUNCTION
- Press one time, the screen display "OH"
and keeps flashing. press + and
timer from 0-24 hours. Press
firm setting, then the indicator light

OPEN WINDOW FUNCTION

- Press one time and the indicator light
is on. If open window function is activated, the
indicator light keeps flashing and stops
heating.
- Press again to quit open window function
and back to previous working situation.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Turn the appliance off using the on/off button.
- Unplug the appliance from the mains.
- Clean the appliance.
- Safety thermal protector:
- The appliance has a safety device, which pro-
tects the appliance from overheating.
- When the appliance switches itself on and
off repeatedly, for reasons other than the
thermostat control, check to ensure that there
are no obstacles that impede correct air entry
or expulsion.
- If the appliance turns itself off and does not
switch itself on again, disconnect it from the
mains supply, and wait for approximately 15
minutes before reconnecting. If the machine
does not start again seek authorised technical
assistance.
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
-
, press + and
to choose heating
M
or ECO
, press +
.
-
to set
again to con-
is on.