Download Print this page

Sealey HT107LED.V2 Instructions For Use page 2

Head torch 5w cree xpg led with adjustable focus & brightness 3 x aa cell

Advertisement

4. operation
4.1.
remove battery box twist cap (anticlockwise to open).
4.2.
Insert 3 x AA batteries into compartment. Orientation diagram for batteries is inside shown inside battery box, replace cap.
4.3.
Front lamp: Press on/off switch once for on, twice for flashing and third time to turn off.
4.4.
Rear lamp: Press switch on side of battery box, once for on, twice for flash and third time for off.
4.5.
dimmer switch: lever on top of battery box adjust for brightness.
4.6.
Adjust beam using lever on front lens.
5. Maintenance
5.1.
Keep the torch clean by wiping with a damp cloth.
5.2.
remove batteries if not being used for a long period of time.
5.3.
store torch and batteries in a dry childproof area.
enVironMent protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
weee regulations
dispose of this product at the end of its working life in compliance with the eu directive on Waste electrical and electronic equipment
(Weee). When the product is no longer required, it must be disposed of in an environmentally protective way. contact your local solid
waste authority for recycling information.
battery reMoVal see 4.1
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak's registered compliance scheme. Jack
sealey ltd Batteries Producer registration number (BPrn) is BPrn00705.
note: it is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important: no liability is accepted for incorrect use of this product.
warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
sealey group, Kempson way, suffolk business park, bury st edmunds, suffolk. ip32 7ar
01284 757500
© Jack sealey limited
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
Ht107led.V2 | issue 1 13/02/18

Advertisement

loading