Extreme Networks ExtremeSwitching SLX 9150 Hardware Installation Manual page 31

Preparing for the Installation
The following tables below list the Extreme Networks 100Gb Direct-Attach Cables and the Extreme
Networks 40Gb Direct-Attach Cables
Table 14: Extreme Networks 100Gb Direct-Attach Cables
Cable Type
QSFP28-QSFP28 Direct attach passive copper cable 10411 or AA1405029-
QSFP28-4xSFP28 (4x25Gb) Direct attach passive
copper breakout
QSFP28-4xSFP28 (4x25Gb) Active optical breakout
cable
Table 15: Extreme Networks 40Gb Direct-Attach Cables
Cable Type
QSFP+ to QSFP+ Direct attach cable
QSFP+ to QSFP+ Active optical cable
QSFP+ to 4xSFP+ Breakout cable
SFP/SFP+ Cable Distances and Types
This section shows one example of cable media types and maximum distances that support reliable
transmission in accordance with international standards (except where noted). Refer to Extreme
Networks Pluggable Transceivers Installation Guide for descriptions of optics and cables, as well as a
complete list of supported cable lengths.
Part Number
E6
10413 or AA1405031-
E6
10414 or AA1405032-
E6
10421
10423
10424
10444
Part Number
AA1404037-E6
AA1404029-E6
AA1404030-E6
AA1404031-E6
AA1404032-E6
AA1404028-E6
AA1404033-E6
AA1404035-E6
AA1404036-E6
AA1404041-E6
ExtremeSwitching SLX 9150 Hardware Installation Guide
Installing Cable
Length
1 meter
3 meters
5 meters
1 meter
3 meters
5 meters
20 meters
Length
0.5 meter
1 meter
2 meters
3 meters
5 meters
10 meters active
optical
1 meter
3 meters
5 meters
10 meters active
optical
31