Siemens HE2224 U Use And Care Manual page 12

Hide thumbs Also See for HE2224 U:
Table of Contents

Advertisement

Available languages

Available languages

The Clock
About the Clock
Setting the Clock
Changing the Clock
English 10
You control the operation of the range by using the touch pads and dial on the
backguard and the knobs on the front panel.
The backguard touchpads, in conjunction with the dial on the backguard, are used
to select an oven mode, set the oven temperature, set the time(s) and to set up
your range. To use the touchpad, press the center part of the pad with the flat part
of your fingertip. A beep will sound to indicate that the selection has been made.
Turn the dial on the backguard to the desired setting and press START.
The knobs on the front panel of the range are used to control the heat level of the
elements. Push down and turn to the desired temperature.
See the sections on "Getting the Most Out of Your Cooktop" on page 19 and "Get-
ting the Most Out of Your Oven" on page 20 for detailed instructions.
Always set the clock after installation or after a power failure. Once power
returns to the oven, the clock defaults to 12:00 am.
The time of day is displayed in hours and minutes.
The clock time will appear during all oven operations except when the timer is
running.
The oven is preset to a 12 hour clock and indicates AM and PM. To switch to
a 24 hour clock, see "Select Function" section.
If you do not complete the operation of setting the clock, the oven will beep
periodically as a reminder to set the clock time. Press OFF to stop the beep-
ing.
1. CLOCK will be displayed and the hour digits
will flash. Turn knob to select hour and AM or
PM.
2. Press TIME. CLOCK will still be displayed
and the minute digits will flash.
3. Turn knob. Set minutes.
4. Press TIME and the clock is now set.
Note:
If operation is not completed, the oven will beep periodically as a
reminder to set clock time. Press OFF.
1. Press TIME. TIMER 1 flashes in display.
2. Turn knob to select CLOCK.
3. Press TIME and hour digits flash.
4. Turn knob to change hours.
5. Press TIME again and minute digits flash.
6. Turn knob to change minutes.
7. Press TIME again and the clock is set.
Note:
To cancel the TIME selection when setting the clock, press OFF at any
time while in the clock mode.
Getting Started
12: 00
AM
CLOCK
1
Time
2
Cooking Mode
Temperature
Start

Advertisement

Table of Contents
loading

This manual is also suitable for:

He2224 c

Table of Contents