Setup - Configuring The Logger - RBR 1050 Series User Manual

Setup – Configuring the logger
Configuring the logger prior to
deployment is simple and can be
done using the Setup window. All
logger programming is accomplished
through this interface with the
exception of setting the calibration
coefficients. The Essential
features window is shown here
displaying the logger time, start and
end times, and the sampling period.
The figure on the following page
shows the setup window expanded
to display all the Advanced
features. This window is displayed
when the particular logger has one
or more of the advanced features of
Autorun, Thresholding, Averaging
The 'Essential features' Setup window.
and Real-time Display.
The complete Setup window showing the 'Essential features' and the 'Advanced features'.
14