Sampling LED control
The Sampling LED gives a visual indication that sampling is taking place. The
Sampling LED can be enabled in the Setup window (p.23). This control allows
the Sampling LED to be turned on and off after setup during deployment.
Note: For maximum battery life, always deploy with the Sampling LED off.
View/load a meta table
In the RBR Databuoy Controllers complex sensors, such as the Vaisala Weather
Transmitter, are connected to the system via an RBR generic serial card. The
generic serial card is configured for the particular sensor using a meta table.
Meta tables are set at RBR Ltd. before delivery. However, it may be necessary
to change the meta table in the field and this function allows the meta table to be
viewed and loaded into the generic serial card.
Run configuration script
This function allows RBR Ltd. to change some characteristics of a logger in the
field. If necessary, RBR Ltd. will provide a script file specific for one particular
logger with the exact instructions of how to use the file in conjunction with this
function.
29