Configuration - Configuring The Operating Software; Derived Units - RBR 1050 Series User Manual

Configuration – Configuring the operating software

Derived units

Derived units setup allows the user to select additional outputs derived from the
measurements taken by the logger. The current possibilities are: Depth, Density
Anomaly, Salinity, Specific Conductivity, Speed of Sound, Dissolved Oxygen
Concentration. In addition a correction can be applied to the raw conductivity
measurements to correct them for temperature and pressure changes.
Selection of particular derived units requests that such units be calculated and
presented in the graphical display and output files when appropriate to the actual
sensors on the logger.
30