Communicating With The Logger - RBR RBRsolo Operation And Maintenance

rbr-global.com
Fig. 5 Battery orientation label

Communicating with the logger

To establish communication between the RBRsolo/duet and a computer, open the instrument
and remove the housing. There is a micro-USB connector located on the opposite side of the
circuit board (Fig. 6). The supplied interface cable is plugged into this connector.
Fig. 6 Micro-USB connector location
RBR Ltd., 5-95 Hines Road, Ottawa, Ontario, Canada K2K 2M5
Tel: +1 613 599 8900 Fax: +1 613 599 8929 info@rbr-global.com
Page 3 of 7
RBR#0001896 Rev A 10/2014