nedis HPBT5400GY Quick Start Manual page 6

•
To prevent possible hearing damage, do not listen at high volume levels for
long periods.
Using the product
4
Due to the wide variety of products with a bluetooth connection we cannot
guaranty that all devices will be recognized or all operating options can
function.
Charging the product
1. Plug the USB power cable B
2. Plug the other end of B
4 The status indicator LED B
charged.
Switching on the product
• Press and hold play / pause B
Pairing the headphones to a Bluetooth audio source
1. Switch on the product to activate searching mode.
2. Enable Bluetooth on the device you want to pair the headphones with.
2
4 B
blinks red and blue to indicate pairing mode is active.
3. Select "HPBT5400GY" from the list of available Bluetooth devices on your
device.
4
When pairing is successful, the headphones voice says "Connected".
4
If the headphones have been paired with another device before, make sure
that device is switched off.
4
If the headphones lose connection to the Bluetooth source, they will
automatically reconnect when back in range and switched on.
Storing music
7
1. Plug B into B
2. Plug the other end of B
3. Copy or move audio files to the internal storage of the product.
Switching between Bluetooth mode and Card mode
(Internal storage mode)
• Double press B
4
The headphones voice says which mode is activated.
7
into the micro USB charging port B
7
into a computer or power adapter.
2
lights up blue when the headphones are fully
3
4
.
7
into a computer.
3
to switch between Bluetooth mode and Card mode.
for 3 seconds.
6
4
.