Advertisement
Available languages
Available languages
SAFETY
_ ______________________________________________
Washing filters improves
7
vacuum
Make sure all the filters
are completely dry before
inserting back into the
vacuum cleaner.
Caution
The motor is equipped with
a thermal cut-out. If for
any reason, the vacuum
cleaner should over-heat, the
thermostat will automatically
turn the unit off. Should this
occur, unplug the vacuum
cleaner from the wall socket.
Remove the dirt container
and empty. Clean the filters.
Allow the cleaner to cool
for approximately 1 hour.
Continue
operating
appliance by inserting the
power plug into the wall
socket and switching it back
on. If the appliance does not
start, wait another 30 minutes
and
repeat
mentioned steps.
18 ENGLISH
per formance.
the
the
above-
Advertisement
