Page 1
Update Information LH90 Version 3.6 We reserve the right to make changes in line with technical progress, product maintenance or changes in production methods. Lenz Elektronik GmbH Hüttenbergstrasse 29 - 35398 Giessen www.digital-plus.de - info@digital-plus.de...
Page 2
Update Information LH90 Version 3.6 Functions F1 to F28 can be switched The range of functions that can be switched has been extended from F1 to F8 to F1 to F28. The method of switching functions 1 to 4 and 5 to 8 remains the same. In addition, the new menu ‘FUnc’...
Page 3
Configuring locomotive decoders Use the new 'MoM' menu to set functions to continuous or temporary operation. This setting can be made individually for each function and each locomotive address. Continuous operation Temporary operation Press the key to activate the function; Press the key to activate the function;...
Page 4
Update-Information LH90 V 3.6 Reading CVs via PoM and the address display LRC120 It is now possible to read CV values via PoM while in operation. Requirements: • Use of a RailCom-able locomotive decoder (GOLD series). • The locomotive is located in a track section monitored by the address display LRC120.