Table of Contents
Advertisement
2. Product information
2.1. Product configuration
Mounting Plate
Upper Frame
Drive Casing
Figure 8
Functions of the major parts
Upper frame and base frame are the structures that form upper and lower parts of the Compactor
body.
In Drive casing, drive axis with eccentric weight which generates compacting force and bearings
that support the axis are assembled.
Motor (hydraulic motor) rotates at high speed by pressurized hydraulic oil from the carrier, to drive
the eccentric axis, and the vibration and centrifugal force induced by the rotation of the eccentric
weight generates compacting force.
Motor control valve is a built-in integrated valve to protect the hydraulic motor. There are two type
of the motor control valve; 'N' type valve has the reverse-flow-bypass and anti-cavitation functions
and 'P' type valve includes flow and pressure control function in addition to the standard features of
the 'N" type valve.
Compacting plate contacting the ground compacts soil and make surface flat.
Cushion rubbers (cushion plates) is parts that help get effective compacting force from the
centrifugal force generated from eccentric weight and protect the carrier and operator by dampening
the vibration during compaction work.
Mounting plate is used to mount the compactor to the carrier using a mounting adapter.
'P' port (IN) and 'T' port (OUT) are connection ports to connect with piping of the carrier.
Components supplied
Compactor Assembly
Standard tool kits
User's Manual, Parts List,
Hose and Fitting Set (Optional)
Compacting Plate
are as follows
at the time of delivery are:
Motor Control Valve
'P' Port
(IN)
Motor
Base Frame
The product configuration may vary depending product model.
Mounting Adapter and fasteners set
(Optional, for Adapter Mount Type only)
Piping Kit (Optional)
(Components of the piping kit vary with
the carrier model.)
- 9 -
'T' Port
(OUT)
Cushion Plate
Advertisement
Table of Contents
