Table of Contents
Advertisement
Customizing this Notebook
Connecting the Printer
If your printer has a USB interface, you can then use the USB port on the
notebook to connect the printer. The following instruction describes the
general procedure to connect a printer:
1. Turn off the notebook.
2. Connect one end of the printer cable to the notebooks USB port and the
other end to the printer.
3. Connect the power cord and turn on the printer.
4. Turn on the notebook and the system will detect a new device. Install the
required driver.
For further instructions, please refer to your printers manual.
3-3
Printer(not included)
USB Port
Advertisement
Table of Contents
Need help?
Do you have a question about the N1030EA1E-1 and is the answer not in the manual?
Questions and answers