Left-Hand Needle - JUKI MO-735N Instruction Manual

Threading 4/3 Thread OL
1
2
5
6
25
2
3
4
7
8
6
7
8
4. Left-hand needle, yellow markings
Place the spool on the spool holder pin as illustrated.
(1) Bring the thread up from the spool and lay it from the back
to the front into the guide.
(2) Thread the first machine guide.
(3) Slip the thread through the groove.
(4,5) Take the thread under the thread guide plate and
through the take up.
(6) Thread the guide.
(7) Thread the guide on needle clamp.
(8) Thread the left needle from front to back.
(9) Place the thread underneath the presser foot.
Lower presser foot.
When threading is complete, lower the upper knife and close
the looper cover.
Note:
If the lower looper has to be re-threaded, cut both needle
threads off at the needle and remove surplus thread from
below. Thread the looper and then re-thread the needles.