Body Composition Monitor and Scale with Bluetooth
BCM-500
Model
Intended for measuring and displaying the following body composition parameters.
-- Body Weight
-- Skeletal Muscle
STEP
Download the app.
1
Download and install the "OMRON
HeartAdvisor" app onto your smart device.
STEP
Pair your smart device.
3
1) Turn on the Bluetooth
device.
2) Open the app and follow the instructions.
Note: You can ignore STEP 1 & 3, if you don't
want to pair with a smart device.
© 2019 OMRON HEALTHCARE, INC.
-- Body Fat
-- Resting Metabolism
HeartAdvisor
®
on your smart
Quick Start Guide
STEP
Insert 4 "AAA" batteries.
2
STEP
Set the measurement
4
unit, date and time.
3. confirm
The date and time will be automatically set
when paired with your smart device. To set
manually, follow the instructions below:
1) Press the
button and the "inchlb" blinks.
2) Press the
button to adjust the measurement
unit.
3) Press the
button to confirm the
measurement unit.
When complete, the year will blink.
4) Repeat the same steps to adjust the year,
month, day, hour, and minute.
5) After all of the settings are entered, the
power automatically turns off.
®
-- Visceral Fat
-- BMI
2. adjust
1. turn on
5022652-7A
Need help?
Do you have a question about the BCM-500 and is the answer not in the manual?
Questions and answers
Purchased Omron BCM-500 simply to use as a scale. Do not need or want electronic connectivity. Cannot figure out how to activate the scale.
To activate the Omron BCM-500 scale without electronic connectivity, press the button to turn on the monitor. Then:
1. Select your user ID when it blinks.
2. Confirm your user ID by pressing the button again.
3. Step onto the monitor with bare feet, placing the arches on the center.
4. Keep knees straight and place the monitor on a hard, level floor.
The scale will measure and display results without needing smartphone or Bluetooth connection.
This answer is automatically generated