Line Buttons - AT&T Merlin Legend MLX-10D User Manual

Your Display Telephone

Line Buttons

The 10 or more buttons in the center of your phone are line
buttons. Line buttons are used to make and receive inside
and outside calls and are assigned by your company. The
MLX10D phone has 10 buttons, the MLX-20L phone has 20
buttons, and the MLX-28D phone has 28 buttons. Use these
buttons make inside calls (to and from other extensions)
to
and outside calls.
Two or more line buttons are labeled either ICOM (Intercom)
or SA (System Access). You have either ICOM or SA
buttons, but never both.
If you have ICOM buttons, use them to place inside calls only.
Use buttons labeled with phone numbers to place outside
calls.
If you have SA buttons, use them for both inside and outside
calls. You must enter a dial-out code (usually a 9) to make an
outside call on an SA button.
You can program a feature onto any unlabeled line buttons.
See Chapter 3 for more on programming unlabeled line
buttons.
Depending on your company, you may or may not have all the
buttons described next. If your phone has SA buttons, see
the following section. If your phone has ICOM buttons, see
"Phones with ICOM buttons."
1-20 Line Buttons