Call Waiting - AT&T Merlin Legend MLX-10D User Manual

Features

Call Waiting

When all the ICOM or SA buttons on your phone are busy
and another call comes in, Call Waiting informs you of inside
calls (single beep) and outside calls (double beep), You'll
also see a message on your Home screen that you have a
call waiting.
To answer a waiting call, you can either hang up or put your
current call on hold. If you hang up, your phone will ring with
the waiting call. If you have more than one call waiting, the
calls are delivered to your phone in the order they arrived.
Callers hear a special Call Waiting ring instead of a busy
signal.
when they are all in use. Call Waiting does not work if your
calls are being covered. You must program your phone to
accept Call Waiting.
To Turn Call Waiting On and Off
1. Press Menu.
2. Select Ext Program [Prog].
3. Select Start.
4. Press any ICOM or SA button.
5. Select ListFeature [List].
6. Select CallWaiting [CWait].
If this feature is not displayed, use FindFeature [Find] or press
More.
5-16 Call Waiting