Automatic Callback - AT&T Merlin Legend 10BS Quick Reference

BRI Access Button Quick Reference

Automatic Callback

With the Callback feature, you can automatically
place a call to the last telephone number called to
a BRI Personal Line, even if the caller's number is
unknown,
Procedure
Follow these steps:
1. With the telephone receiver off-hook, press
the button,
Personal Line
The Personal Line green LED lights,
You receive a dial tone.
Proceed to step 4.
4. Dial the
feature code
Callback feature.
The telephone number from which the last
call was received on the BRI line is
automatically dialed by the CO.
— If the telephone number being called is
available, you hear ringback, Identify
yourself to the party called.
— If the number is busy the CO "camps" or
queues the call at the called number When
the number is available, the CO calls you
back on the BRI line used to place the call.
All telephones sharing the Personal Line
button ring with a priority ring (four-burst
ring for MLX sets; three-burst ring for
analog multiline phones) to indicate the
completed call.
to activate the
If more than one BRI line is assigned as a
Personal Line button and you do not know
which Personal Line button was used to
receive the last call, follow steps 2 and 3:
If your telephone is an MLX display set, press
2 .
the BRI Access button. You receive the
display: Dial 4 for In; 6 for Out. Dial 4 which
represents the letter "l" for incoming calls,
The red LED (which represents the MERLIN
LEGEND Idle Line Preference feature) moves
to the last Personal Line button used to
receive an incoming call on a BRI line.
The green LED next to the BRI Access Button
goes off.
Lift the receiver, or if the telephone is
3.
equipped with a speakerphone, press the
button.
Speakerphone
The green LED lights.
You receive a dial tone.
Proceed to step 4.