Pogo Turf Pro System Manual page 50

Logging Specs
Once you choose Spec in either the Setup
Menu or the Sample page, you can add
any or all of the specs on the page as you
wish
Specs are zone specific so be sure to
choose your zone at the bottom left of
the screen. You may also choose a
location within the zone if desired.
Ensure the GPS button is white indicating
it is activated. This will allow precise
mapping on the cloud system
You may take a 'Memo' with any spec
settings
Enter Speed in Feet and Inches
Firmness is in thousandths of an inch
Slope allows for positive and negative
direction for both front/back and
left/right positions. Positive (+) numbers
means sloping uphill from front to back
and from left to right
Custom numbers can be any numeral
value you choose. For instance, Clegg
hammers, used for firmness
measurements, do not measure in a
fraction of an inch. They measure in
gravities. That value can be put in one of
these custom cells while a performance
number of your choice can occupy the
other. Or use it for something else. Your
choice.
Be sure to 'Save' your settings
Tap Back to get back to the Sample page