Call Coverage/Consult - Lucent Technologies Definity 8434DX User Manual

Call Coverage/Consult

To answer a call for a
coworker for whom you
are a coverage point
To leave a message telling
a coworker to call the
original caller's extension
To use the Consult
feature to talk privately
with a coworker after
answering a redirected
call
1
Press the call appearance button of the incoming call
when ring begins or green light flashes
Note: The call is not at your terminal until the
green light is flashing.
1
Press
Coverage CallBack
Note: To leave a message telling a coworker to call
you, press
LWC
1
Press Transfer
Call is temporarily put on hold
2
Press and then press the softkey below Cnslt
Menu
or Press
Consult
or Dial the coworker's extension
Note: You can privately discuss call; if the coworker
is not available, press the call appearance button
next to the fluttering light to reconnect to the call.
If your coworker has activated Send All Calls, you
must use the Consult feature to reach your coworker.
3
Press again to send the call to the coworker
Transfer
or Press to make it a 3-party call
Conf
while connected to the call
[confirmation tone]
instead.
or Conf
[priority ring to coworker]
[single-burst ring to coworker]
[dial tone]
20