Singer SHG 6201 Instruction Manual page 9

How to get a professional ironing finish
A normal iron generates only a small quantity of steam. In this case it is necessary to
produce steam constantly in order to eliminate crease in the fabric being ironed.
A professional ironing system works rather differently. The fabric is first made
Damp by the steam and then, in a second phase, dry-ironed in the normal way. This
means that every. Tiniest crease is removed and your garments are ironed to perfection.
In the first phase (steam-damping of the fabric),hold the iron about 20 cm. above
The fabric and press the steam. Pass the iron over the garment in a circular movement so
that the powerful jet of steam damps the fabric. Lightly creased garments require only a
few moments of steaming. While very heavy fabrics or garments with particularly difficult
creases must be damper, so steam must be applied for a few seconds more.
During the second phase (dry ironing), check that the thermostat knob is in the correct
position for the type of fabrics; release the steam button and dry-iron the garment.
The special soleplate will prevent the fabrics from becoming shiny. Using this ironing
technique, and following the suggestions in the chart above, you will find it easy to give
your garments a really professional ironing finish.
CLEANING
Before cleaning the iron, disconnect it from the power supply and allow it to completely
cool down on the iron stand.
NEVER IMMERSE THE APPLIANCE IN WATER OR OTHER LIQUIDS.
Clean the boiler tank every three months by carrying out the following the procedure:
- unplug the iron from the wall socket;
- fill the boiler tank with normal tap water, rinse and drain;
- clean the appliance using a wet cloth.
Correct Disposal of this product
environmental safe recycling.
Warranty Information
The manufacturer provides warranty in accordance with the legislation of the
customer's own country of residence, with a minimum of 1 year (Germany: 2
years), starting from the date on which the appliance is sold to the end user.
The warranty only covers defects in material or workmanship.
The repairs under warranty may only be carried out by an authorized service
centre. When making a claim under the warranty, the original bill of purchase
(with purchase date) must be submitted.
The warranty will not apply in cases of:
- Normal wear and tear
- Incorrect use, e.g. overloading of the appliance, use of non-approved
accessories
- Use of force, damage caused by external influences
- Damage caused by non-observance of the user manual, e.g. connection to an
unsuitable mains supply or non-compliance with the installation instructions
- Partially or completely dismantled appliances
01_Instruction Manual.indd 7
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact
the retailer where the product was purchased. They can take this product for
7
02.05.2012 17:50