Indirect Measurement - UNI-T MIE0149 Owner's Manual

Area
Press button until
Press button to take first length measurement (e.g. length).
Press this button again to take the second length measurement (e.g.
width). After taking the second measurement, the area/surface is
automatically calculated and displayed in the summary line.
Area summation
Press until
Press button to take first length measurement (e.g. width).
Press this button again to take the second length measurement (e.g.
length).
The current area will be displayed automatically.
Press button to take the third length measurement (e.g.
length).
The sum of the areas will be displayed automatically.
Volume
Press button until
Afterwards, press
button for width. Press button
After taking the third measurement, the volume is automatically
calculated and displayed.

Indirect measurement

Using 2 measurements
Press button until the display shows
upper point (1) and then press
measurement. After the first measurement, the value is adopted.
Owner's manual
symbol appears on the display.
symbol appears on the display.
symbol appears on the display.
button to measure the length. Press
to take the height measurement.
symbol. Aim at the
to take the necessary
EN
21