Continuous Shooting (Burst Mode) - FujiFilm X-T30 Owner's Manual

I

Continuous Shooting (Burst Mode)

Capture motion in a series of pictures.
1
Rotate the drive dial to select CH (high-
speed burst) or CL (low-speed burst).
Navigate to DRIVE SETTING in the A SHOOTING SETTING
2
menu and choose a frame advance rate (P 127).
N
This feature can also be accessed via shortcuts (P 222).
3
Keep the shutter button pressed to take photos at the rate
selected in Step 2.
N
Shooting ends when the shutter button is released or the memory
card is full.
O •
If fi le numbering reaches 999 before shooting is complete, the re-
maining pictures will be recorded to a new folder.
•
Shooting ends when the memory card is full; the camera will record
all photos shot to that point. Burst shooting may not begin if the
space available on the memory card is insuffi cient.
•
Frame rates may slow as more shots are taken.
•
Frame rate varies with the scene, shutter speed, sensitivity, and focus
mode.
•
Depending on shooting conditions, frame rates may slow or the fl ash
may not fi re.
•
Recording times may increase during burst shooting.
5
83