Pager Setup Dialog - Bosch Security Escort SE2000 Series Technical Reference Manual

102 en | System menus and screens
3 Character system ID
[Save]
[Cancel]
4.3.17

Pager setup dialog

This dialog sets up remote pager access for troubles (service) and alarms (security).
Figure 4.52: Pager Setup Dialog
Automatically send
selected troubles
Phone number
Password
Pager ID
2019.08 | V2.18.1.6 | DOC
Enter a unique three character ID that is used as an
extension to the map and database files for accessing this
Security Escort System.
Save the changes and close the dialog window.
Cancel the changes and close the dialog window.
If checked, send the troubles selected in the Popup trouble filter
dialog to the service pager.
Phone number to be dialed to access the paging service. This phone
number is usually different from the number you would manually dial
to send a page. The paging company assigns this value.
This is the password that must be sent to the paging service to send
the page. If not required, leave this field black. Usually a password is
not required. The paging company assigns this value.
This is the ID that identifies the specific pager that this message is to
be sent to. Many times, it is the last 7 digits of the phone number that
you would manually dial to access this pager. The paging company
assigns this value.
Technical Reference Manual
Security Escort
Bosch Security Systems B.V.