Table of Contents
Advertisement
114 en | System menus and screens
Incoming Communication
Errors
Incoming Retried
Messages
Total Outgoing Messages Total number of outgoing messages that were sent on this socket.
Outgoing Retried
Messages
Receive Buffer Max
Transmit Buffer Max
[Reset Status]
[Refresh Data]
4.6
About menu
Figure 4.63: About Menu
Demo manual alarm, subscriber 1For demonstration only, and can't be used in a live system.
2019.08 | V2.18.1.6 | DOC
Number of messages that the system detected errors in, on this
socket. If displayed in yellow, this value is more than 1.5% of the
Successful Incoming Messages.
Number of successful receptions which indicated that the retries by
the sending application. If displayed in yellow, this value is more
than 1.5% of the Successful Incoming Messages.
Number of outgoing messages that were retried because the
receiving application did not acknowledge them. If displayed in
yellow, this value is more than 1.5% of the Total Outgoing
Messages.
Maximum number of bytes that were received on this serial port,
but not yet processed by the system. If displayed in yellow, more
than 50% of the queue was in use.
Maximum number of bytes that were processed by the system, but
not yet transmitted on this socket. If displayed in yellow, more than
50% of the queue was in use.
Clicking this button resets all values shown in this dialog.
Clicking this button refreshes all values shown in this dialog. The
values are not automatically updated when the dialog is left open.
It causes system to display an alarm from the subscriber
with transmitter ID number 1. In the System Preferences
Technical Reference Manual
Security Escort
Bosch Security Systems B.V.
Advertisement
Table of Contents
