Plumbing Diagrams - Rheem Everhot 2A1050M7 Service Instructions Manual

PLUMBING DIAGRAMS

The following information and plumbing diagrams are provided as a guide only. For more
information refer to the relevant Installation Instructions.
Two Temperature Zone Plumbing Diagram
Circulated Flow & Return Plumbing Diagrams
For circulated hot water flow and return systems, a temperature limiting device can only be
installed on a dead leg which branches off the circulated hot water flow and return pipe.
Installing a temperature limiting device in the circulated flow and return
pipe work, or circulating tempered water from a temperature limiting device
may cause water to be delivered to ablution areas at a temperature
exceeding the requirements of AS/NZS 3500.4.
TM074: Stainless Steel Electric Water Heater Service Instructions
REV AB Issued: 07/16
This document is stored and maintained electronically by Rheem Technical Support. All printed copies are deemed "uncontrolled"
9