Table of Contents
Advertisement
Remove mounting bolts 4 of
rear wheel, holding wheel as
you do so.
Lower rear wheel onto
ground.
Roll rear wheel out toward
rear.
Installing rear wheel
Threaded fasteners not
tightened to the speci-
fied torque can work loose or
their threads can suffer dam-
age.
Always have the tightening
torques checked by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
Roll the rear wheel onto the
rear wheel support.
Place the rear wheel on the
rear wheel support.
Install wheel studs 4 di-
agonally with appropriate
torque.
Rear wheel on drive
shaft
44 lb/ft (60 Nm)
Turn the end muffler 3 to its
initial position.
Install screw 2 for end muf-
fler bracket in rear footrest,
but do not tighten it at this
point.
7
93
z
Advertisement
Table of Contents
