Table of Contents
Advertisement
Switching on high-beam
headlight
Press top part of switch 1
for high-beam headlight.
With the engine switched
off, you can turn on the
high beams either by turning
them on while the ignition is
switched on or by activating
the headlight flasher.
High-beam headlight is
switched on.
Move switch 1 for high-
beam headlight to center
position.
High-beam headlight is
switched off.
Press bottom part of
switch 1 for high-beam
headlight.
High-beam headlight is
switched on as long as
switch is pressed (headlight
flasher).
Switching on parking
light
Switch off ignition.
You can switch on the
parking lights only imme-
diately after switching off the
ignition.
Press and hold left turn indi-
cator button 1 until parking
light is switched on.
Switching off parking
light
Switch on ignition.
Parking light switched off.
Headlight
Adjusting headlight for
RHD/LHD traffic
When riding in countries
where traffic drives on the op-
posite side of the road to that
in which the motorcycle was
4
45
z
Advertisement
Table of Contents
