Clock; Engine Speed Warning - BMW F 800 ST 2006 Rider's Manual

4
36
Press and hold odometer
button 2 until display is re-
set.
z
The tripmeter is reset to ze-
ro.

Clock

Setting clock
Attempting to set the
clock while riding the
motorcycle can lead to ac-
cidents.
Adjust the clock only when
the motorcycle is stationary.
Switch on the ignition.
Press button 1 for longer
than 2 seconds.
Hours reading 3 starts to
flash.
Briefly press button 1.
The hour increments by one
each time you press the
button.
Press button 1 for longer
than 2 seconds.
Minutes reading 4 starts to
flash.
Briefly press button 1.
The minute increments by
one each time you press the
button.
Press button 1 for longer
than 2 seconds.
Setting confirmed.

Engine speed warning

Display
The engine speed warning
signals to the driver that the
red engine speed range has
been reached.This signal is
shown in red by the flashing
of the anti-theft alarm indica-
tor light 1.