RH-109
Service Devices and SW Update
Service Devices
Product specific devices
The table below gives a short overview of service tools that can be used for testing, error analysis and repair of
product RH-109, refer to various concepts.
Cables
The table below gives a short overview of service tools that can be used for testing, error analysis and repair of
product RH-109, refer to various concepts.
Issue 1
MJ-199
This device holds the PWB during testing. It has a serial port interface
to connect to the service software.
RJ-230
RJ-230 is a soldering jig used for soldering and as a rework jig for the
engine module.
SS-179
This jig is used when replacing the domesheet on the PWB to ensure
correct alignment.
CA-128RS
The RF cable is used to connect, for example, a module repair jig to
the RF measurement equipment.
Attenuation for:
• Cell band: 0.51
• PCS band: 0.85
• AWS Tx band: 0.75
COMPANY CONFIDENTIAL
Copyright © 2008 Nokia. All rights reserved.
Module Jig
Universal Soldering Jig
Domesheet Alignment Jig
RF cable
Page 2-5