Specifications - Horizon Fitness HD-S2 User Manual

Specifications

Charging
Universal AC Battery Charger 100V~240V ~ 0.8A max. 50/60Hz. Intelligent charger .
DC 12V Charger 1.5A max.
Figure 8 A/C input connector.
2.1mm female plug for external charge via 12 Volt DC 2 Amp fused car charger.
Run time with full charge, average 6 hours from 2.4Ah Li-Po (Lithium Polymer) battery
Connections
LNB input via `F` type female connector. Impedance 75 ohms with short circuit protection -
750mA maximum current limiter
Computer Interface: USB port for updating satellite settings
Operating Specifications
RF input range 950-2150MHz 40dBuV to 110dBuV (approximate)
LNB Supply Voltage: 13V for V and 18V for H @ 250 mA nominal. 21V SCR
LNB Short circuit protection @ 900mA
x255 Transponders or 127 Satellites, horizontal & vertical
DVB-S QPSK,DSS QPSK, DVB-S2 QPSK, 8PSK, APSK, C, Ku and Ka-Band, VSAT compatible.
Input dynamic range – 70dBm to 0dBm
RF Level can be displayed in dBuV (general accuracy +/-1dB) or linear scale (256 steps).
Input impedance 75 Ohms
Symbol Frequency rate from 1Msps~45Msps
MER (Modulation Error Rate) is displayed in dB
The Quality indicator locks on faster making it easier to identify the satellite initially;
typically locks in less than 100mS
Audible and visual tune-in, with selectable and adjustable display backlight and contrast.
Page 24