Table of Contents
Advertisement
HD-S2 Sub Menu
◄Exit
DiSEqC
Spectrum
Spectrum
Constellation
Custom
Customize
LNB 21V
Orientation
Log as 00000
Log All 00000
LNB Drift
LNB/Cable test
Sub Menu Overview
DiSEqC:
Allows the sending of DiSEqC switch commands to select different LNB sources.
Spectrum:
Shows you a visual representation of the selected transponder.
Spectrum
:
Lifts the signal amplitude so that weaker signals can be seen.
Constellation:
Shows a constellation diagram of the current locked transponder selection.
Custom:
A list of editable transponders (carriers) stored on your meter.
Customize:
The function allows you to edit the custom carriers.
LNB 21V:
To enable 21 Volts for Stacked LNB assemblies.
Orientation:
An aid to finding your satellite quickly that provides look angles.
Log as 00000:
A logging function for individual transponder measurements stored incrementally.
Log All 00000:
A logging function for all transponders associated with the satellite selected.
LNB Drift:
A measurement tool for testing LNB frequency drift relative to transponder centre frequency.
LNB/Cable Test:
Performs a LNB function test and displays voltage and current measurement.
Your HD-S2 has a range of features available from the Sub Menu.
►
To access the sub menu press the UP (off) button once from the
searching screen. Using the keypad as cursor keys you can select the
various options. At any time you can press and hold the UP button to
switch the meter off. When Exit is highlighted, you can also use the
RIGHT button to switch the meter off.
Note: The Constellation. Log, LNB 21V, Log As 00000, Log All 00000
and LNB Drift functions are only available once a satellite has been
found and a lock acquired.
The full sub menu is shown on the left, only 4 selections visible, you
may need to scroll up and down to access the function you require.
Page 8
Hide quick links:
Advertisement
Table of Contents
