Table of Contents
Advertisement
Auto tuning
Before using Auto tune it is important that you se-
lect your desired system i.e. B/G for Continental
Europe, D/K for Eastern Europe, I for the U. K., L1
(12) and L2 (8) for France.
Should you also wish to tune to alternative systems
this must be done manually, after using Auto tune.
1
Press the MENU button and press the > (or <) but-
ton to select the SET UP menu.
2
Press the > button to select the AUTO TUNING dis-
play.
Press the
(or
) button to highlight START.
3
) button to highlight AUTO TUN-
Press the
(or
ING.
Press the > (or <) button to select the required SYS-
TEM. i.e. B/G, D/K, I, L1 (12) and L2 (8).
4
Press the > button to start the automatic search.
DO NOT PRESS ANY BUTTONS WHILST THE AU-
TOMATIC SEARCH IS IN PROGRESS. If you make
a mistake simply repeat steps 3 and 4 to start again
from the beginning.
Each station will be displayed along with a station
identifier, if available.
Allow the television to complete the search.
To tune any stations on different systems, choose
the system you want, then use Manual tune for all
the extra stations you require.
PROGRAMMING CHANNEL MEMORY
– 17 –
Manual tuning
1
Press the MENU button and press the > (or <) but-
ton to select the SET UP menu.
2
) button to highlight MANUAL
Press the
(or
TUNING.
Press the > button to select the MANUAL TUNING
menu and ENTER button.
3
Press the > (or <) button to select SEARCH.
Press the
button to search up the band (>>>) or
the
button to search down the band (<<<).
The SEARCH will flash and the TV will show the
channel numbers whilst the TV is searching.
When a station/satellite is found it will be displayed.
4
Press the > (or <) button to select the PRO-
GRAMME NO.
Press the
(or ) button to select the program po-
sition number required.
Press the ENTER button if you wish to store the
broadcast displayed (ENTER: TO STORE will high-
light momentarily) or repeat from step 3 if you wish
to continue searching.
The display will stay on screen for approx. 60
seconds. If you do not STORE the program po-
sition it will not be held in memory.
Repeat the procedure for all the remaining program
positions you wish to tune, including the satellite.
Press the EXIT button to exit when you have fin-
ished.
Advertisement
Table of Contents
