Setup Menu - NDS 90R0123 User Manual

Setup Menu

Menu Position:
To select from 4 preset screen locations for display of the OSD menu, tap the
Language:
To select one of eight languages: English, Deutsch, Français, Italiano, Svenska, Español, Nederlands, or
Pycckий, tap the or
DPMS Enable
To enable or disable Display Power Management System (DPMS), tap the
buttons.
Off: Default setting.
On: If there is no input signal, a "D.P.M.S" message displays for 10 - 15 seconds before
the display goes into Power Saving mode. The display turns on when the input signal is restored.
Menu Lock
To enable Menu Lock, tap the
Off: Default setting.
On: Disables access to all OSD menus except the Input Menu. The OSD Menu closes,
and a MENU LOCKED message displays briefly. To unlock OSD access, simultaneously
press the MENU and SCROLL buttons until the MENU UNLOCKED message displays.
Backlight
To adjust the backlight level of the display, tap the
Backlight Stabilization
To enable or disable backlight stabilization, tap the
Off: Default setting.
On: Controls LED output to maintain a consistent backlight luminance to compensate for LED output
degradation over the display lifetime.
Keypad Color
To modify the Keypad color setting, tap the
Preset Defaults
The presets available include: Preset TC201, TC200, and NeoIP.
The parameters can be adjusted on a per-use basis; however, the adjustments cannot be saved. Each time a
preset is selected, a pre-defined settings will be loaded.
buttons.
button.
or
or buttons.
or buttons.
buttons.
or buttons.
or
Display User Interface | 7