Stopping Dhw Heating - Viessmann VITOLIGNO 300-C Operating Instructions Manual

DHW Heating
Setting a Time Program

Stopping DHW Heating

30
(continued)
Deleting time phases
To delete a time phase, press the following keys:
1. Proceed as described in points 1 to 12 of chapter
2. d until the end point of the selected time phase
3.
4. d to confirm.
5.
Restoring time phases to their factory settings
If you want to restore all DHW heating time phases to
their factory settings, press the following keys:
1.
2.
3. d to confirm.
4.
5. d to confirm.
6.
7. d to confirm.
8.
9. d to confirm.
10.
Press the following keys in the standard menu:
1.
2. d to confirm.
3.
4. d to confirm.
5.
6. d to confirm.
"Setting a time program".
is displayed.
/ until "- - : - -" is displayed for the end point.
| ~
until the default display is shown.
for "Extended menu".
/ for "Settings".
| ~
/ for "Standard setting".
| ~
/ for "DHW".
| ~
/ for "Yes".
| ~
until the default display is shown (see page 12).
/ for "DHW".
| ~
/ for "Operating program".
| ~
/ for "Standby mode".
| ~
Vitoligno 300-C Operating