Comfort and Energy Saving Functions
Selecting the Holiday Program
26
To save energy, for example during long holiday
absences, you can enable the holiday program.
Setting a holiday program
The holiday program starts at 12:00 am (00:00 h) the day
after the departure date. The holiday program ends at 12:00
am (00:00 h) on the day of your return. In other words, the
set switching times will be active on the day of your
departure and the day of your return.
Note: The control unit is set so that the holiday program
applies to all heating circuits and there is no DHW
heating. If you want to change this, contact your
heating contractor.
Press the following keys:
1.
for "Extended menu".
2.
|/~ to select "Heating".
3.
d to confirm.
4.
to select "Heating circuit 1" (HC1), "Heating
circuit 2" (HC2), "Heating circuit 3" (HC3) or
"Heating circuit 4" (HC4).
5.
|/~ for "Holiday program".
6.
d to confirm; the current date "Departure date"
and the following date "Return date" are
displayed.
7.
|/~ for departure date.
If you want to terminate the set holiday program
prematurely, press
is shown (see page 12).
8.
d to confirm.
9.
|/~ to set the required date.
10. d to confirm.
"Adopted" appears briefly in the display.
11. |/~ for return date.
12. d to confirm.
13. |/~ to set the required date.
14. d to confirm.
"Adopted" appears briefly in the dialogue line of
the display.
Vitoligno 300-C Operating
until the default display