4 button remote start security system with plug-in shock sensor & starter disable (13 pages)
Summary of Contents for Audiovox APS-95BT2
Page 1
TRANSMITTER PROGRAMMING GUIDE The transmitters included in the security system kit are pre-programmed at the factory, with button # 1 assigned to channel one only. The suggested program arrangement is listed below. To program channels 2 and 3, please follow the programming instructions listed on pages two and three of this manual.
Page 2
These factory programmed settings can be prioritized based on an individual's frequency of use, (i.e. pressing both buttons simultaneously to activate channel 1, arm/disarm etc.) by following the normal programming instructions below. Please note when changing the factory set button assignments, it is necessary to perform steps 5, 9, and 12 three times using "transmitter A", followed by one time using "transmitter B".
11. The dash mounted LED will flash 3 times, and the siren will "chirp" indicating that the system is ready to accept programming for channel 3. (APS 350) 12. Press and hold the remaining transmitter button function. The siren will emit a long "chirp"...
Page 4
6. Method of payment; check one of the boxes below. Mastercard Visa Check or money order * (do not send cash) * Make checks payable to Audiovox Corporation 7. Credit Card Number : ___________________________________________ 8. Credit Card Expiration Date : __________________________ Credit card purchasers can order additional or replacement transmitters by phone.