Table of Contents
Advertisement
Quick Links
4 Button Remote Start Security System With
Plug-In Shock Sensor & Starter Disable
IMPORTANT ! In order to provide you with the highest level of security to your
vehicle, this system is equipped with selectable manual override circuitry. It is
possible that you will need to override you security system if the transmitter
becomes lost, or inoperative due to battery failure. Reading the sections on
"Manually Overriding Your System" is necessary to fully understand the procedure
required to enable your vehicle in such situations. In addition, the chart on the last
page of this manual has a section for the particular features and options installed
in your vehicle as well as the override method selected. Although the default
mode is "Valet Switch" operation, the system can be configured for "Custom
Code" operation for enhanced security. Confirm the override mode selected on
the last page of this manual, and familiarize yourself with the section on it's opera-
tion.
FEATURES :
w 1 Two Way 5 Button Remote Control And 1 One Way 4 Button Remote Control
w Six Channel Code Learning Programmable Receiver
w External Superheterodyne Transceiver Antenna
w Single Or Two User Programmable W/Separate Control Outputs
w Single Button Lock/Unlock or Separate Button Lock/Unlock or Both
w Remote Keyless Entry With Optional Access Guard (must have power door
locks)
w Selectable Manual Override Mode
w New Enhanced Panic Feature (Any button other than unlock stops siren, no
change to the units state)
w Smart Disarm (If triggered, elect to shut off siren, or disarm entire unit )
w Adjustable Shock Sensor Via The Transmitter (Pre-Detect Off, Pre & Full Detect
Off, City Mode)
w Safe Start Output Controlled From Channel 3 (Option Channel 3 For Trunk, Or
For R/S)
w 24 Hour Time Start Mode
w Cold Temperature Start Mode
w 2 or 4 Hour Automatic Start Mode
w Parking Meter Count Down Timer On LCD Remote
w Additional Count Down Timer Mode
w Remote Panic In All Modes (Press & Hold Lock /Unlock Button For 3 Seconds
To Engage)
w Improved Custom Code Override, User Selectable and Programmable
Model APS-995C
Owner's Manual
Advertisement
Table of Contents
Related Manuals for Audiovox Prestige Platinum APS-995C
Summary of Contents for Audiovox Prestige Platinum APS-995C
- Page 1 Parking Meter Count Down Timer On LCD Remote w Additional Count Down Timer Mode w Remote Panic In All Modes (Press & Hold Lock /Unlock Button For 3 Seconds To Engage) w Improved Custom Code Override, User Selectable and Programmable Model APS-995C Owner’s Manual...
- Page 2 w Protected Push Button Valet/Override Switch w 7-Function LED-Arm / Disarm / Zone 1 / Zone 2 / Zone 3 / Valet / Arming w Intrusion Alert With Memory w Instant Siren Activation w Starter Disable Output w Additional Engine Immobilizer Output, (Optional Relay Required) w True Last Door Arming (Hardwire Only) w Defective Zone By-Pass w Defective Zone Chirp Confirmation (Unit Chirps To Report Zone Cleared)
-
Page 3: Arming The System - Active
known as a code grabber, which will receive and store the signal from your keychain transmitter and re-transmit at a later time to disarm your system. Your Keeloq Code Hopping transmitters will change their signal every time the button is pressed, so when a thief grabs then re-transmits your signal, the alarm system will not respond. -
Page 4: Arming The System - Passive (Automatic)
þ Siren will not sound. If the siren sounds 3 chirps, then you have left a door, trunk, or hood lid ajar. Simply close the opened entry point to provide full protection o Doors Lock - Optional NOTE: If the optional Headlamp illumination feature has been added, and has been selected for operation when arming, as an added convenience, the system will turn on the headlights when the system is armed. -
Page 5: Disarming The System
þ Any mild impact to the vehicle’s glass will cause the alarm to sound a short series of warning tones. þ Any strong impact to the vehicle’s glass will cause the alarm to trigger for the full 30 second alarm cycle. NOTE: If the optional interior illumination circuit was installed, the interior light will flash as well for the full 30 second alarm cycle. -
Page 6: While The System Is Sounding
The LED will start flashing rapidly, indicating that the system is re-arming automatically. Open any door to suspend the automatic arming. þ Parking Lights flash two times. If the parking lights flashed three times, then the alarm was triggered in your absence. Before turning the key on, examine the LED to identify which zone was triggered. -
Page 7: Manually Overriding Your System
When the system is in valet mode, all alarm functions are bypassed, however the remote panic feature and remote door locks will remain operational. In addition, the parking lights will flash to indicate locking and unlocking. To use the valet mode, the system must first be disarmed either by using your keychain transmit- ter or by activating your personalized manual override code. - Page 8 If the new code was accepted, the unit will report back the newly entered code, by flashing the LED, first indicating the 10ths digit, pause and then the units digit. The unit will report the new code three times with a one second pause between each code, then the system will begin arming.
-
Page 9: Eliminating The Normal Arm / Disarm Chirps
1. Enter the vehicle and turn the ignition switch to the on position. NOTE: The siren will sound. 2. Within 5 seconds, press and release the pushbutton switch 1 time. 3. Within 5 seconds, turn the ignition switch off then on. 4. - Page 10 SAFETY (Red Handled ) CONTROL SWITCH The control switch allows you to temporarily disable the remote starting function of your APS-995C. To disable the unit, move the red handled control switch to the off position. The control switch also allows you to select between 2 hour start up and 4 hour start up when using the automatic start up timer mode.
-
Page 11: Remote Starting The Vehicle
5. Race the engine to above 4000 RPM. OPERATING ON AUTOMATIC START UP TIMER MODE The APS-995C has the ability to automatically start the vehicle every 2 or 4 hours over a 48 hour period. This feature is especially useful in cold climates where... - Page 12 the only means to keep the engine and engine fluids warm is to periodically start the engine. WARNING! Be certain that the vehicle is outdoors before using this or any remote vehicle starting device. A running engine produces dangerous car- bon monoxide fumes which can be harmful or fatal if prolonged expo- sure occurs.
- Page 13 o Remote Electric Trunk Release o Remote Car Starter o Remote Window Closure o Remote Garage Door Interface NOTE: In addition there may be a second optional feature connected to your system that when the same transmitter button is pressed and released 2 times within 3 seconds (double pressed), the second optional feature will acti- vate.
- Page 14 ADDITIONAL REMOTE FUNCTION ( CHANNEL 6 ) Channel 6 is an alternate output that can be controlled by the unlock button of the transmitter, or by and independent button or combination of buttons. For your vehicle this output is: Controlled By: o Trunk/Key Button o Option Button o Lock + Unlock Buttons o Lock + Trunk/Key Buttons o Lock &...
- Page 15 TRANSCEIVER ICONS AND THEIR INDICATIONS When Disarmed, Press the Arm/Lock button to Lock and Arm the System. The Lock Icon is displayed on the LCD panel & the parking lights flash once. When Armed, Press the Disarm/Unlock button to Unlock and Disarm the System. The Unlock Icon is displayed on the LCD panel &...
- Page 16 The following trigger patterns will be displayed. Triggered and the entry attempt was made to one of the vehicle doors. Triggered and entry attempt was made to the vehicles hood or trunk. Triggered and entry attempt was made to the vehicles glass, or the vehicle has been hit or bumped hard enough to cause a response from the vibration detec- tor.
- Page 17 ADDITIONAL REMOTE FEATURES: The two way remote control unit allows you to access status information from the vehicle, check temperature, light the display, toggle the transmitter from beep tones to vibrate mode, initiate daily start timer, and temperature start. Selection of these and other features are shown below: NOTE: Transmitter must be within operating range of the vehicle, approximately 1000 ft.
- Page 18 To use this feature please refer to the chart on the following page. NOTE: Your APS-995C is shipped with two transmitters, 1 two way, shown on a previous page, and the one way transmitter, shown below. The two way unit is programmed from the factory with separate lock &...
- Page 20 4 CHIRPS * These chirps are optional, and can be de - activated. PARKING LAMP INDICATORS 1 FLASH 2 FLASHES 3 FLASHES © 2002 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, NY 11788 APS 995C PASSIVE ARMING/ACTIVE ARMED DISARMED VALET MODE...