Troubleshooting - Bresser Jumbo LCD Instruction Manual

5. Push the TIME SET button (11) again to chan-
ge to the next setting.
6. After setting the value for the day, push the
TIME SET button (11) again to complete the
manual time setting.
NOTE!
All Setting mode will automatically exit in 15 sec-
onds without any adjustment.
For Time Zone: Time Zone is used in countries
which can receive the DCF frequency signal but
the time zone is different from German Time ( i.e.
GMT+1).
Mounting/Positioning
NOTE!
Make sure you have mounted or placed the de-
vice in a safe way. Otherwise the device may fall
down and heavy damages can occur for which
the manufacturer is not liable.
The wall clock can be mounted on walls with the
wall mount (9). Moreover they can be placed on
plane surfaces with the fold-out table stand (15).

Troubleshooting

Transmission collision
Signals from other household devices, such as
door bells, home security systems and entry con-
trols, may interfere with those of this product and
cause temporarily reception failure. This is nor-
mal and does not affect the general performance
of the product. The reception of the time signal
will resume once the interference recedes.
Other malfunctions
If there is no response from the wall clock by key-
strokes or if any other malfunctions occur per-
form the following steps.
GB
9