Engine Oil-Machines With Honda Engines; Cleaning Sediment Cup-Machines With Honda Engines - WACKER Group PG 2 Repair Manual

Maintenance
4.8 Engine Oil—Machines with Honda Engines
See Graphic: wc_gr000022
4.8.1
4.8.2
4.8.3
4.8.4
4.8.5
4.9 Cleaning Sediment Cup—Machines with Honda Engines
See Graphic: wc_gr000029
4.9.1
4.9.2
4.9.3
4.9.4
wc_tx000607gb.fm
Drain the oil while the engine is still warm.
Remove the oil filler plug (a) and the drain plug (b) to drain the oil.
Note: In the interests of environmental protection, place a plastic sheet
and a container under the machine to collect any liquid that drains off.
Dispose of this liquid in accordance with environmental protection
legislation.
Install the drain plug.
Fill the engine crankcase with the recommended oil up to the level of
the plug opening (c). See Technical Data for oil quantity and type.
Install the oil filler plug.
Turn the fuel valve off.
Remove the sediment cup (a) and the O-ring (b).
Wash both thoroughly in a nonflammable solvent. Dry and reinstall
them.
Turn the fuel valve on and check for leaks.
28
PG Pumps