Advertisement
Available languages
Available languages
Disconnecting the noise-com from the radio
1. Switch the radio OFF.
2. Loosen the radio audio adapter screw and
remove the adapter from the side of the radio.
3. Replace the radio audio adapter dust cover.
Cleaning of the noise-com parts
CAUTION: The speaker and the
!
microphone are sensitive parts -
always handle with care.
CAUTION: Do not apply solvents or
similar caustic chemicals.
The unit can be cleaned with a damp cloth or
brush and a mild detergent solution (e.g. washing
up liquid).
Clean the connector with high-quality Vaseline
spray or a similar type of lubricant.
SERVICE
This product contains no serviceable parts.
Replacement noise-com, microphone wind
shields 2604002K01 (pack of five) are available,
please contact your local Motorola representative
or Dealer for details.
5
Advertisement
