Station List; Adding Stations To The Station List - Furuno FELCOM 15 Operator's Manual

2. SYSTEM INITIALIZATION
2.7

Station List

2.7.1

Adding stations to the station list

The FELCOM provides an "address book" for storing 64 station IDs. Enter
station IDs as below.
1. Press the function key [F8] to display the Setup menu.
2. Press the [A] key to display the Configuration menu.
3. Press the [1] key to display the Station List.
4. Operate the [↓] key to place the cursor on a blank line.
5. Press the [Enter] key.
6. Press the [Enter] key to open the station group entry window.
7. Enter station group name, using up to five characters.
8. Press the [Enter] key to close the window.
9. Press the [↓] key to choose Station Name.
10. Press the [Enter] key.
11. Enter station name, using up to 15 characters.
12. Press the [Enter] key to close the window.
13. Press the [↓] key to choose Destination Type.
2-22
File Edit Transmit EGC
Setup
Configuration
Station Group Name Type
01 abc E-Mail
xyz E-Mail
02
03 Seagull TELEX
04
05
06
07
08
Page Up, Page Down: Move
Sort (Ctrl+G: Group, Ctrl+N: Station Name,
Ctrl+T: Type)
Station Group
Station Name
Destination Type TELEX
Prefix Code
Country Code
Station ID
Modem Type
E-Mail Address
Remarks
Erase the Name to delete this station.
Entering a station on the station list
Reports Logs Options
Station List
Code, ID / Address
abc@ furuno.co.jp
xyz@ furuno.co.jp
584 463609999
Ctrl+P: print
Sample station list
Setup Position StopAlarm