Furuno FELCOM 15 Operator's Manual page 42

5. Press the [Enter] key to close the additional position entry window.
6. Press the [↓] key to choose Navarea.
7. Press the [Enter] key to open the Navarea entry window.
Receive EGC Area
Additional Position
Fixed Area
Waypoint (from NAV Equipment)
NAVTEX
Station Code
Type of Message (Can't reject other report)
Ice reports
Meteo. forecasts
Pilot service
DECCA messages
LORAN messages
EGC setup menu, Navarea entry window
8. Enter additional Navarea(s) (up to nine) for which you want to receive
broadcasts, referring to the figure below for appropriate code.
9. Press the [Enter] key to close the navarea entry window.
10. Press the [↓] key to choose Waypoint.
Note: "Fixed Area" is where you enter fixed areas (max. 3) for chart
correction service. However, this service is not yet available; enter no
data.
Setup
EGC Setup
Navarea
OFF
OFF OMEGA messages
OFF SATNAV messages
OFF Other navaid msg
OFF QRU (no message)
OFF
Navareas
2. SYSTEM INITIALIZATION
: :
OFF
OFF
OFF
OFF
2-13