Furuno FELCOM 15 Operator's Manual page 43

2. SYSTEM INITIALIZATION
11. Press the [Enter] key to open the waypoint entry window.
12. Choose ON to receive broadcasts for the area which contains the destination
waypoint set on the navigator.
13. Press the [Enter] key to close the waypoint window.
14. Press the [↓] key to choose Station Code.
15. Press the [Enter] key to open the Station Code entry window.
16. Enter the navtex station code (A-Z) of the navarea. For details about navtex
stations, consult the operator's manual of the navtex receiver.
17. Press the [Enter] key to close the Station Code entry window.
18. Using the up/down arrow keys, enable/disable reception of NAVTEX
broadcasts as appropriate and then press the [Enter] key.
Note: Navtex messages "Coastal navigational information", "Meteorological
2-14
Setup
Receive EGC Area
Additional Position
Navarea
Fixed Area
Waypoint (from NAV Equipment)
NAVTEX
Station Code
Type of Message (Can't reject other report)
Ice reports
Meteo. forecasts
Pilot service
DECCA messages
LORAN messages
EGC setup menu, waypoint entry window
Setup
Receive EGC Area
Additional Position
Navarea
Fixed Area
Waypoint (from NAV Equipment)
NAVTEX
Station Code
Type of Message (CanÕt reject other report)
Ice reports
Meteo. forecasts
Pilot service
DECCA messages
LORAN messages
EGC setup menu, station code entry window
warning" and "Search and rescue alert" (they do not appear on the
display) cannot be deleted since they are considered essential to
navigation.
EGC Setup
: :
OFF ON
OFF
OFF OMEGA messages
OFF SATNAV messages
OFF Other navaid msg
OFF QRU (no message)
OFF
EGC Setup
: :
OFF
OFF OMEGA messages
OFF SATNAV messages
OFF Other navaid msg
OFF QRU (no message)
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF