Ebyte E70-DTU User Manual page 9

Chengdu Ebyte Electronic Technology Co.,Ltd
3. After entering the 4G/2G network transparent transmission configuration mode, you can configure the parameters of the 4G/2G
module in the Related Parameter Settings box. After the configuration is complete, click the "Save Parameters" button and the host
computer will prompt "Save all". The parameter was successful." After completion, as shown below:
4. Switch from "4G/2G Network Transparent Transmission" to "RF", and the related information such as the device model will be
displayed in the message box on the right. The user configures the RF module in the "Related Parameter Settings". After the
configuration is completed, click the "Save Parameters" button. After completion, as shown below:
Copyright ©2012–2019 Chengdu Ebyte Electronic Technology Co.,Ltd
E70-DTU (433NW30-GPRS) User Manual
8