Note - Ebyte E70-DTU User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd
（ 3 ）Ebyte cloud transparent transmission
（ 4 ） Smart building

4 Note

PC click "to enter configuration mode", the system in the configuration state, press the Reload button 4 ~ 10 s,

products will be back to factory Settings, and automatically switch to a communication status, "choice mode", the
switch at this time the upper machine message box will pop up "parameter error \ r \ n try click enter configuration
status button" message, at this time to enter the configuration state, the "public order and prompt" click on the
upper machine box "to enter configuration mode" button, if you want to keep communication, do not click the
"enter configuration mode" button.
If the upper computer prompts wrong parameters or the module fails to respond, please try to solve the problem by

pressing the Reset button, re-entering the configuration state, checking whether the USB connection is correct, and
checking whether the module is powered on normally.
Enter the configuration state, check whether the USB connection is correct, check whether the module is powered

on normally.
The status bar of the upper computer device shows "no valid device found". Check whether the USB cable and

power cord are connected correctly. If they are connected, try to press the Reset button, re-plug the power cord or
re-plug the USB.
Server A of this product is always open. After successful initialization, it will automatically establish connection

Copyright ©2012–2019 Chengdu Ebyte Electronic Technology Co.,Ltd
E70-DTU (433NW30-GPRS) User Manual
15