Application Model - Ebyte E70-DTU User Manual

Hide thumbs Also See for E70-DTU:

Table of Contents

Chengdu Ebyte Electronic Technology Co.,Ltd

network as its PANID (you can join any network when configured as 65536).

7. Restore the factory function

There are two ways to restore the factory:

Software recovery from the factory: Users can use the official E70-DTU (433NW30-GPRS) configuration software to reset 4G in the

4G/2G network transparent transmission configuration mode and RF configuration mode by clicking the "Restore Factory" button. 2G

module and RF module. Note that if you click the "Restore Factory" button in the 4G/2G network transparent transmission configuration

mode or RF mode, after all the modified parameters are completed, you need to click the "Module Restart" button again to restore the

factory or configured 4G/2G. The network transparent transmission parameters take effect.

Hardware recovery factory: Users can press the Reload button on the side of the radio and continue to release after 4~10S. If the WORK

light flashes, the factory settings will be restored successfully. At this time, the system will automatically switch to communication mode.

The status needs to be re-clicked on the "Enter Configuration Status" button.

3 Application model

（ 1 ）E70-433NWxx+ E70-DTU (433NW30-GPRS)+ Server A

2 ）E70-DTU (433NW30)+ E70-DTU (433NW30-GPRS)+ Server A

（

E70-DTU (433NW30-GPRS) User Manual

Table of Contents

433nw30-gprs