Ebyte E70-DTU User Manual page 10

Chengdu Ebyte Electronic Technology Co.,Ltd
5. After the module parameters are configured, click the "Module Restart" button in the "Common Commands and Prompts" box to
make the modified 4G/2G parameters and RF parameters take effect and the system automatically enters the communication state.
After completion, as shown below
6. After entering the communication state, if the LINK indicator is always on and the AUX indicator of the USB to TTL module is off within 30
seconds, it means that E70-DTU (433NW30-GPRS) is connected to the server, and E70-433NWxx module and E70- The DTU
(433NW30-GPRS) connection is successful, and the network can be transparently transmitted at this time.
7. The mobile phone pays attention to the "Ebyte Internet of Things Application Expert" WeChat public ID, enter the page, click: Customer
Support->Device Test, the screenshot of the mobile phone is as follows:
8. Use the serial port assistant to send data to the E70-433NWxx module. If the E70-DTU (433NW30-GPRS) receives the data
Copyright ©2012–2019 Chengdu Ebyte Electronic Technology Co.,Ltd
E70-DTU (433NW30-GPRS) User Manual
9